Plug-In Hybrid Electric Vehicles

Plug-in hybrid electric vehicles (PHEVs) use batteries to power an electric motor and use another fuel, such as gasoline or diesel, to power an internal combustion engine or other propulsion source. Using electricity from the grid to run the vehicle some or all of the time reduces operating costs and petroleum consumption, relative to conventional vehicles. PHEVs might also produce lower levels of emissions, depending on the electricity source.

Heavy-duty vehicles can be converted to PHEVs and a few light-duty PHEVs are commercially available. Although PHEVs are generally be more expensive than similar conventional and hybrid vehicles, some cost can be recovered through fuel savings, a federal tax credit, or state incentives.

Powered by Electric Motor and Engine

Plug-in hybrid electric vehicles have an internal combustion engine or other propulsion source and an electric motor, which uses energy stored in batteries. PHEVs generally have larger battery packs than hybrid electric vehicles do. This makes it possible to drive moderate distances using just electricity (about 10 to 40-plus miles in current models), commonly referred to as the "all-electric range" of the vehicle.

During urban driving, most of a PHEV's power comes from stored electricity if the battery is charged. For example, a light-duty PHEV driver might drive to and from work on all-electric power, plug in the vehicle to charge it at night, and be ready for another all-electric commute the next day. The internal combustion engine powers the vehicle when the battery is mostly depleted, during rapid acceleration, or when intensive heating or air conditioning is required Some heavy-duty PHEVs work the opposite way, with the internal combustion engine used for driving to and from a job site and electricity used to power the vehicle's equipment or control the cab's climate while at the job site.

Fueling and Driving Options

Plug-in hybrid electric vehicle batteries can be charged by an outside electric power source, by the internal combustion engine, or through regenerative braking. During braking, the electric motor acts as a generator, using the energy to charge the battery. Learn more about charging PHEVs.

PHEV fuel consumption depends on the distance driven between battery charges. For example, if the vehicle is never plugged in to charge, fuel economy will be about the same as a similarly sized hybrid electric vehicle. If the vehicle is driven a shorter distance than its all-electric range and plugged in to charge between trips, it may be possible to use only electric power.

Fuel-Efficient System Design

Beyond battery storage and motor power, there are various ways to combine the power from the electric motor and the engine. The two main configurations are parallel and series. Some PHEVs use transmissions that allow them to operate in either parallel or series configurations, switching between the two based on the drive profile—this is called "blended mode" or "mixed mode".

  • Parallel hybrid operation connects the engine and the electric motor to the wheels through mechanical coupling. Both the electric motor and the engine can drive the wheels directly.
  • Series plug-in hybrids use only the electric motor to drive the wheels. The internal combustion engine is used to generate electricity for the motor. General Motors (GM) uses a slightly modified version of this design in the Chevy Volt. GM refers to this design as an extended range electric vehicle (EREV). The electric motor drives the wheels almost all of the time, but the vehicle can switch to work like a parallel hybrid at highway speeds when the battery is depleted.

Alternative Fuels:
 Electricity

Newsletters

CWCC Newsletters
Industry Updates
Clean Cities Now

Board Minutes

Latest Meeting Minutes
List All Minutes

Awards

CWCCC Awards
CWCCC Fleet Awards
CWCCC Hall of Fame

Back to Top

Memory used 1.341MiB | Time to process 0.04109 seconds